STEAMPOD STEAM STRAIGHTENER PRO BLACK 

You can continue to use your normal products, such as styling gels, conditioners, mousses, etc. Or, better yet, heat protecting products specially formulated for blow outs and straightening. However, never use your straightener if you have applied a hair relaxer, as it could severely damage your hair.

With a classic straightener, no. After shampooing, condition as needed. Use a hair dryer until almost completely dry.
With the Wet & Dry straightener, you can style both dry or damp hair.

Always start with the hair underneath: work first from the base, moving on to the sides and finishing in the front.

Avoid choppy motions whilst styling; straighten each section once, in one smooth, continuous movement. Repeat as necessary.

You're probably in locked mode (a padlock will be showing on the screen).
To unlock the straightener, press continuously on the + button or the – button.

The resin is worn out, you need to change it.
If your water is of medium hardness you should be able to use the new cartridge for 6 months.
The resin is made from polystyrene and can be thrown out with the other household waste when the cartridge is worn out.
Here's how to fit the cartridge:
• Take the cartridge out of its sachet
• Remove the red protective seal on the top of the cartridge
• Remove the lid of the reservoir by unclipping it completely
• Slot the cartridge into place
• Replace the lid of the reservoir by clipping it back on. You will hear a click sound.

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

In a very humid environment, it's possible that although you can't see the steam it's still producing the required effect.

Check that your straightener is not in economy energy mode.
Check that you've plugged your straightener in and firmly pressed the ON/OFF button to switch it on.

It's possible that the resin cartridge is blocked up with impurities. In this case, remove the cartridge, empty the reservoir and clean the top grill of the cartridge with some alcohol based household cleaner.
Also check that you've correctly removed the red protective seal from the resin cartridge.

Check that you have you correctly removed the red protective seal from the resin cartridge.

Bring your straightener to an approved service centre.

Check whether you've been using your straightener in the right direction (refer to user's manual).
Check whether you've selected the right temperature (refer to user's manual).
Check that your straightener is producing steam.

Check that you've filled the reservoir correctly. If the level is lower than the minimum level, fill the reservoir and close the tongs for around 90 seconds until the steam comes out.
Check that your straightener is at the right temperature. Wait until the figure representing the temperature you've chosen stops flashing.
Check that the steam cord isn't stuck.

Unplug it immediately and take it to an approved service centre.

A Class I appliance must be earthed (and has only one insulation layer). A Class II appliance does not necessarily have to be earthed because it has two distinct and independent insulation layers.

• Short or layered hairstyle, or thin and fragile hair: straightener with narrow or normal plates.
• Long hair (below the shoulders): wide plates facilitate and accelerate the straightening process.
• Thick, unruly hair, hard to straighten or unruly hair: professional straighteners with black plates.

They are mostly aimed at women with hair that is hard to straighten, curly, frizzy or very long. They are time saving and yield excellent results.

• Fine, fragile or damaged hair: 80 to 150°C.
• Normal, fine or soft hair: 150 to 170°C.
• Frizzy, wavy or very frizzy hair: 170 to 190°C.
• African-type or kinky hair: 190 to 230°C.
Certain models have an automatically adjusting temperature system based on hair type and health.

Lissima lets you straighten long, medium-long and layered hair, as well as short bobs.

This system allows the plates to adapt to the hair's thickness and to remain in constant contact, for more efficient straightening.

It allows for automatic adjustment to the optimal temperature, based on hair type (wavy, frizzy, etc.) and hair health (healthy, weak, etc.) to protect it.

This type of coating naturally protects hair from the effects of heat, making it shinier.

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Warranty section of the website.

This is quite normal, the straightening iron is fitted with a mobile plate so as to aid more efficient smoothing.

If it's blue, then your cartridge is worn out. You need to change it.
If it's yellow, then your cartridge has dried out. You need to moisten it again by refilling the reservoir.