How to Clean Your Rowenta AeroSteam: The Complete Care Guide

A little care can go a long way when it comes to keeping your garment steamer ready for what's next.

Once the last wrinkle is smoothed and your outfit is ready to go, taking a few simple steps — from emptying the water tank to checking the filter — can help keep your Rowenta AeroSteam clean and ready for your next steam.

The best part? It doesn't take much. Here's what to know about caring for your AeroSteam steamer, from one steam to the next.

Why Regular Care Matters for Your AeroSteam Steamer

AeroSteam works a little differently from a traditional handheld steamer. It combines Opti-Flow suction, steam, and a heated soleplate to grip fabric and smooth wrinkles with one-handed control.

Because suction is part of the process, the filter can collect lint over time. And like any steamer, AeroSteam also comes into regular contact with water.

That's why a few simple care habits matter. Think of it this way: AeroSteam takes care of the wrinkles. A little care from you helps keep it ready for the next ones.

What Should You Do After Using Your AeroSteam?

Your shirt is smooth. Your outfit is ready. Before AeroSteam gets put away, there's one quick thing left to do.

Turn it off, unplug it, and empty the water tank completely.

And when filling the tank for your next steam, keep it simple: water is all you need. Avoid adding other products to the water tank, as additives can cause spitting or leave marks on fabrics.

Fill. Steam. Empty. Done.

Then, leave AeroSteam unplugged and give it time to cool completely before cleaning. The AeroSteam instructions for use specify allowing the appliance to cool for one hour before cleaning or removing the filter. Set it in an upright position on a flat, stable surface while it cools.

Rowenta Steamer Cleaning: How to Clean Your AeroSteam Steamer

When it comes to Rowenta steamer cleaning, less is more.

Once the appliance has completely cooled, use a dry cloth to gently clean the exterior. A slightly damp cloth can be used on any stubborn marks, but never soak the appliance. Skip detergents, abrasive pads, and non-abrasive sponges — even the gentler options aren't needed here. And don't wash or rinse AeroSteam directly under water.

No complicated cleaning process. Just keep it gentle and keep it dry.

How to Take Apart Your AeroSteam Steamer for Cleaning

There's no complex disassembly needed to keep your AeroSteam clean. The only removable part designed for user cleaning is the filter — the rest of the appliance stays intact.

To access the filter safely: unplug the appliance, let it cool for a full hour, and follow the removal steps outlined in your user guide. Never attempt to open the main body of the steamer.

How Do You Clean the AeroSteam Filter?

Once AeroSteam Twist or AeroSteam Twist Deluxe is cool, it's a good time to give the filter a quick look.

Because Opti-Flow suction draws fabric toward the steamer, lint can collect in the filter along the way. If you notice buildup:

• Remove the filter following the instructions for use.
• Gently clear away the lint with your fingers or a small brush.
• Check for any residue or fibres of the fabric caught along the filter mesh.

There's no need to bring it to the sink. The filter should stay dry and should not be immersed in water.

Once it's clear, place it securely back into AeroSteam before your next use. A quick check now means one less thing to think about the next time you steam.

Does the AeroSteam Need Descaling?

Unlike some steam irons and steam stations that include built-in anti-calc systems for handling mineral deposits from hard water, the AeroSteam's filter is designed to collect lint — not scale. That means AeroSteam doesn't require the same descaling routine as other appliances in the Rowenta lineup.

If you'd like a full guide on descaling other Rowenta garment care products, see our how to descale a garment steamer article for step-by-step tips.

AeroSteam Not Steaming? Quick Troubleshooting Tips

If your AeroSteam feels less powerful than usual, a few quick tips before assuming there's an issue:

• Check the water tank. Empty tank = no steam. Refill and try again.
• Confirm the heat-up time. Give it the full 35 seconds before pressing the steam trigger.
• Inspect the filter. Lint buildup can affect suction performance. If the filter is clogged, remove any lint with your finger or a small brush before using AeroSteam again.
• Look for the auto-off signal. If the appliance has powered down automatically after inactivity, simply turn it back on.

If steam performance still seems off after these checks, refer to the instructions for use or contact Rowenta customer service.

How to Get Your AeroSteam Ready for Your Next Steam

Now the tank is empty. The filter is clear. Your AeroSteam is clean. When the next wrinkled shirt, dress, or last-minute item on a hanger comes along, you're ready to start again.

Fill the tank with water, hang your garment, and let AeroSteam get back to work. When using Soft Suction or Turbo Suction, keep AeroSteam in contact with the fabric and glide from top to bottom to get the most from the suction. Then, when you're finished, the same simple care cycle starts again:

Simple AeroSteam Care, From One Steam to the Next

Empty the tank when you're finished. Give the appliance time to cool. Check the filter for lint. Keep cleaning simple.

A few small steps between steams are all it takes to keep AeroSteam clean and ready for whatever you're wearing next. Because when the next wrinkle shows up, your AeroSteam should be ready, too.

Discover the Rowenta AeroSteam Collection and explore more tips for getting the most from your garment care.