ROWENTA X-Cel Steam Steamer

X-Cel Steam Steamer
Look great in no time!

X-Cel Steam Steamer is the most powerful handheld steamer on the market. Its strong steam output and large metal head remove wrinkles easily on all kinds of fabrics, from the thickest to the most delicate.    

Reference : DR8050U1

*Power defined as steam output in G/min –DR 80XX handheld steamers range versus top similar competitive handheld steamers (Mean steaming rate value) on the US/Canada market 2014 – External test April. 2015

ROWENTA X-CEL HANDHELD STEAMER: A NEW WAY OF STEAMING IN THE PALM OF YOUR HAND

For everyday garment steaming solutions, look no further than the palm of your hand.

Rowenta's X-Cel Steam Handheld Steamer delivers unrivalled speed and convenience in wrinkle and crease removal for a wide variety of fabrics.

This time-saving handheld steamer produces presentable clothing through an easy process that eliminates the need of an ironing board, for great efficiency.

This garment steamer features such as a start-up time of only 45 seconds, a removable 200 ml/6.

76 oz tank, strong steam output that sanitizes and refreshes as it steams, a lock position for continuous steam, an on/off indicator and more are ideal for garment care on a daily basis.

Quick and efficient garment steaming has never been easier.

Technical specifications / comparison

Power 1500  W
Steam output up to 22  g/min
Heat-up time 45  s
Water tank capacity -200  ml
Power cord length 3  m
Autonomy 10  min
Steam ready indicator    
Colours Preppy Blue / Deep Dive Blue  

Documentation

FAQ

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.
Product Reviews