ROWENTA X'CEL STEAM+ GARMENT STEAMER

X'CEL STEAM+ GARMENT STEAMER
Easier and faster wrinkle removal*

Rowenta X'cel Steam + offers fast, efficient steam just in time! The steamer's powerful design - with two steam levels, a cast aluminum heat plate with ceramic coating and ultra-fast heating - ensures high-performance, effective steaming every day. Thanks to its new technology, steam anything, anywhere, at any moment with a single vertical movement - even when it's time to go!

Reference : DR8120U1

* Compared to Rowenta DR70 Range

* By Rowenta, in Watts

Rowenta X'cel Steam+ handheld steamer: Power and performance, every day!

Enjoy fast, efficient steam day after day with Rowenta X'cel Steam+, the powerful handheld steamer for efficient use on a wide range of fabrics. Boasting 1600 W of power and continuous steam on demand, it ensures excellent results, with 20 g/min of steam flow on Delicate level and 26 g/min on Super Turbo level. A cast aluminum heating plate with ceramic coating provides better results than ever, while a quick heat-up of just 40 seconds means X'cel Steam+ is ready when you are. Thanks to the steamer's revolutionary design and heated soleplate technology, it removes wrinkles in a single vertical movement, with no need for an ironing board - perfect for last-minute and on-the-go steam sessions. It can even be used to refresh and sanitize your home. Rounding it all off are convenient features including a 190 ml removable water tank for long steaming sessions and easy refills, as well as an extra-long 3 m cord and steam locker for total freedom of movement. Plus, four smart accessories provide added ease of use: a fabric brush for easy use on heavy fabrics, a steam bonnet for use on delicate fabrics, a door hook to easily hang your clothes for steaming, and a crease attachment for perfect creases on jackets or pants.

Technical specifications / comparison

STEAM & POWER PERFORMANCE
Power 1600  W
Steam output 26  g/min
Steam head Ceramic Soleplate  
Heat-up time 40  s
Sanitize    
COMFORT IN USE
Power cord length 3  m
Steam Setting 2  
Steam control on handle    
Water tank capacity 200  ml
On/Off switch Hand operated  
Water tank Removable  
Autonomy 10  min
Steam ready indicator    
Power cord storage Velcro  
Anti scale function Rinsing system  
Steam on demand    
Heated soleplate    
Usage Vertical & Horizontal  
Number of settings 2  
ACCESSORIES
Accessories Crease attachment, Fabric Brush , Steam Bonnet  
Door hook    
OTHER FEATURES
Colours Deep Dive Blue / White  

Documentation

FAQ

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water that is free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself and take it to an approved repair centre.
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.
Product Reviews