ROWENTA X-CEL STEAM STEAMER DR8050

X-CEL STEAM STEAMER DR8050

Look great in no time!

X-Cel Steam Steamer is the most powerful handheld steamer on the market. Its strong steam output and large metal head remove wrinkles easily on all kinds of fabrics, from the thickest to the most delicate.

 

Reference : DR8050U1

A NEW WAY OF STEAMING IN THE PALM OF YOUR HAND

For everyday garment steaming solutions, look no further than the palm of your hand.

Rowenta's X-Cel Steam Handheld Steamer delivers unrivalled speed and convenience in wrinkle and crease removal for a wide variety of fabrics.

This time-saving handheld steamer produces presentable clothing through an easy process that eliminates the need of an ironing board, for great efficiency.

Features such as a start-up time of only 45 seconds, a removable 200 ml/6.76 oz tank, strong steam output that sanitizes and refreshes as it steams, a lock position for continuous steam, an on/off indicator and more are ideal for garment care on a daily basis. Quick and efficient garment steaming has never been easier.

*Power defined as steam output in G/min –DR 80XX handheld steamers range versus top similar competitive handheld steamers (Mean steaming rate value) on the US/Canada market 2014 – External test April. 2015

Technical specifications / comparison

Power 1500  W
Steam output up to 22  g/min
Heat-up time 45  s
Steam head Plastic  
Sanitize    
Anti scale function Rinsing system  
Water tank capacity 200-  ml
Water tank Removable  
Power cord length 3  m
Autonomy 10  min
Adjustable pole No  
On/Off switch Hand operated  
Steam Setting No  
Steam ready indicator    
Power cord storage Velcro  
Accessories storage No  
Accessories Fabric Brush  
Colours Preppy Blue / Deep Dive Blue  

FAQ

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water that is free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.

Product Reviews